留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

并行差异断面顶管施工对地表变形的影响

黄建华 鲍锋 王蕴晨 李宏

黄建华, 鲍锋, 王蕴晨, 李宏. 并行差异断面顶管施工对地表变形的影响[J]. 地质科技通报, 2021, 40(6): 185-192. doi: 10.19509/j.cnki.dzkq.2021.0618
引用本文: 黄建华, 鲍锋, 王蕴晨, 李宏. 并行差异断面顶管施工对地表变形的影响[J]. 地质科技通报, 2021, 40(6): 185-192. doi: 10.19509/j.cnki.dzkq.2021.0618
Huang Jianhua, Bao Feng, Wang Yunchen, Li Hong. Influence of ground-surface deformation in pipe jacking construction with parallel differential section[J]. Bulletin of Geological Science and Technology, 2021, 40(6): 185-192. doi: 10.19509/j.cnki.dzkq.2021.0618
Citation: Huang Jianhua, Bao Feng, Wang Yunchen, Li Hong. Influence of ground-surface deformation in pipe jacking construction with parallel differential section[J]. Bulletin of Geological Science and Technology, 2021, 40(6): 185-192. doi: 10.19509/j.cnki.dzkq.2021.0618

并行差异断面顶管施工对地表变形的影响

doi: 10.19509/j.cnki.dzkq.2021.0618
基金项目: 

国家自然科学基金项目 51678153

福州市科技计划项目 2018-G-42

校产学合作开发基金项目 GY-Z17145

详细信息
    作者简介:

    黄建华(1969-), 男, 教授, 主要从事地铁与隧道、地下围护与结构、岩土与环境等方面的研究工作。E-mail: huangjh@fjut.edu.cn

  • 中图分类号: TU74

Influence of ground-surface deformation in pipe jacking construction with parallel differential section

  • 摘要: 城市地下空间开发和交通的发展促使大断面顶管技术在城市隧道建设中得到了广泛推广应用,其中并行顶管隧道的功能要求不同,因此其断面形状和尺寸也各有差异。基于城市下穿主干道的双线并行差异大断面顶管隧道工程,建立有限元三维计算模型进行系统分析,同时结合现场顶管项目的实测成果,研究并行顶管差异断面及不同工序情况下地表变形的特性及其影响因素。研究结果表明并行差异断面顶管施工引起的地表变形曲线呈"Ⅴ"形,地表变形曲线的峰值点由大断面矩形顶管轴线逐渐转移至两管中心;小断面矩形顶管轴线左侧的地表沉降值较轴线右侧大;先施工大断面矩形顶管更有利于地表变形的控制;断面尺寸的变化对地表变形的影响幅度为30%,工序差异对地表变形的影响幅度为8%,断面尺寸差异对地表变形的影响比工序差异的影响大。并行差异断面顶管施工对地表变形影响研究可为今后相关并行大断面顶管工程提供理论基础和经验借鉴。

     

  • 图 1  工程平面位置示意图

    Figure 1.  Sketch of engineering plane position

    图 2  并行差异断面顶管示意图

    Figure 2.  Different section of parallel pipe jacking

    图 3  三维模型网格划分

    Figure 3.  Grid division of 3D model

    图 4  地表竖向位移云图

    Figure 4.  Cloud image of surface vertical displacement

    图 5  横向地表变形曲线

    Figure 5.  Curves of transverse surface deformation

    图 6  纵向地表变形曲线

    Figure 6.  Curves of longitudinal surface deformation

    图 7  两种工序下的横向地表变形曲线

    Figure 7.  Curves of transverse surface deformation under two construction sequences

    图 8  双管贯通时的竖向位移云图

    Figure 8.  Vertical displacement cloud map with double pipe transfixon

    图 9  Y=13 m处横向地表变形曲线

    Figure 9.  Curves of transverse surface deformation(Y=13 m)

    图 10  地表变形监测点平面布置图

    Figure 10.  Plane layout of surface deformation monitoring points

    图 11  横向地表变形曲线

    Figure 11.  Curves of lateral surface deformation

    图 12  横向地表变形模拟值与实测值对比

    Figure 12.  Comparison between simulated value and measured values of transverse surface deformation

    表  1  土层力学参数

    Table  1.   Mechanical parameters of soil layer

    地层名称 地层厚度/m 重度/(kN·m-3) 弹性模量/MPa 泊松比υ 黏聚力/kPa 内摩擦角φ/(°)
    杂填土 3.1 17.0 15.0 0.35 10.0 10.0
    淤泥 10.0 15.9 10.5 0.38 10.9 5.4
    中砂 2.9 18.0 30.0 0.27 3.0 20.0
    下载: 导出CSV

    表  2  模型中其他材料参数

    Table  2.   Other material parameters in the model

    材料名称 重度/(kN·m-3) 弹性模量/103 MPa 泊松比υ
    顶管管节 25 34.5 0.2
    顶管机 78 200 0.2
    下载: 导出CSV

    表  3  模拟施工参数

    Table  3.   Simulating construction parameters

    顶管类型 开挖面支护力/MPa 注浆压力/MPa
    大矩形顶管 0.12 0.05
    小矩形顶管 0.16 0.05
    下载: 导出CSV
  • [1] 荣亮, 杨红军. 郑州市下穿中州大道超大断面矩形顶管隧道施工沉降控制技术[J]. 隧道建设, 2015, 35(12): 1338-1344. doi: 10.3973/j.issn.1672-741X.2015.12.016

    Rong L, Yang H J. Settlement control technology for tunnel crossing underneath Zhongzhou zvenue in Zhengzhou constructed by super-large rectangular cross section pipe-jacking machine[J]. Tunnel Construction, 2015, 35(12): 1338-1344(in Chinese with English abstract). doi: 10.3973/j.issn.1672-741X.2015.12.016
    [2] 唐培文. 大断面矩形顶管减阻技术应用研究: 以苏州综合管廊矩形顶管为例[J]. 地质科技通报, 2020, 39(2): 198-203. doi: 10.19509/j.cnki.dzkq.2020.0222

    Tang P W. Application of drag reduction technology of large section rectangular pipe jacking: A case study of rectangular jacking of Suzhou comprehensive pipe rack[J]. Bulletin of Geological Science and Technology, 2020, 39(2): 198-203(in Chinese with English abstract). doi: 10.19509/j.cnki.dzkq.2020.0222
    [3] 王道伟, 王福芝, 黎轩, 等. 水平平行顶管相互影响试验研究[J]. 地质科技情报, 2016, 35(2): 71-74. https://www.cnki.com.cn/Article/CJFDTOTAL-DZKQ201602017.htm

    Wang D W, Wang F Z, Li X, et al. Experimental study on influence between horizontal parallel pipe jacking[J]. Geological Science and Technological Information, 2016, 35(2): 71-74(in Chinese with English abstract). https://www.cnki.com.cn/Article/CJFDTOTAL-DZKQ201602017.htm
    [4] 李博, 许烨霜, 马磊, 等. 平行顶管近接施工的室内试验研究[J]. 地下空间与工程学报, 2014, 10(1): 67-71, 155. https://www.cnki.com.cn/Article/CJFDTOTAL-BASE201401011.htm

    Li B, Xu Y S, Ma L, et al. Laboratory investigation on effects of nearby construction of parallel pipe-jacked tunnels[J]. Chinese Journal of Underground Space and Engineering, 2014, 10(1): 67-71, 155(in Chinese with English abstract). https://www.cnki.com.cn/Article/CJFDTOTAL-BASE201401011.htm
    [5] Chapman D N, Ahn S K, Hunt D V. Investigating ground movements caused by the construction of multiple tunnels in soft ground using laboratory model tests[J]. Canadian Geotechnical Journal, 2007, 44(6): 631-643. doi: 10.1139/t07-018
    [6] 李明宇, 王松, 张维熙, 等. 大断面矩形顶管隧道施工引起的地面沉降分析[J]. 铁道建筑, 2019, 59(5): 81-84. https://www.cnki.com.cn/Article/CJFDTOTAL-TDJZ201905019.htm

    Li M Y, Wang S, Zhang W X, et al. Analysis of ground subsidence caused by construction of large section rectangular pipe jacking tunnel[J]. Railway Engineering, 2019, 59(5): 81-84(in Chinese with English abstract). https://www.cnki.com.cn/Article/CJFDTOTAL-TDJZ201905019.htm
    [7] 周浩, 周千淼, 谈力昕, 等. 考虑注浆作用的矩形顶管竖向土压力计算模型[J]. 地质科技通报, 2021, 40(2): 125-130. doi: 10.19509/j.cnki.dzkq.2021.0201

    Zhou H, Zhou Q M, Tan L X, et al. Vertical soil pressure calculation model of rectangular box jacking considering grourting effect[J]. Bulletin of Geological Science and Technology, 2021, 40(2): 125-130(in Chinese with English abstract). doi: 10.19509/j.cnki.dzkq.2021.0201
    [8] Ocak I. A new approach for estimating the transverse surface settlement curve for twin tunnels in shallow and soft soils[J]. Environmental Earth Sciences, 2014, 72(7): 2357-2367. http://www.onacademic.com/detail/journal_1000036499491710_dc83.html
    [9] Wang H, Qin W M, Jiao Y Y. Stability assessment for highway with large-span box culvert jacking underneath: A case study[J]. Canadian Geotechnical Journal, 2013, 50(6): 585-594. http://www.onacademic.com/detail/journal_1000036846039010_dd3c.html
    [10] Chen R P, Zhu J, Liu W, et al. Ground movement induced by parallel EPB tunnels in silty soils[J]. Tunnelling and Underground Space Technology Incorporating Trenchless Technology Research, 2010, 26(1): 163-171. http://www.researchgate.net/profile/Wei_Liu146/publication/222218007_Ground_movement_induced_by_parallel_EPB_tunnels_in_silty_soils/links/561dd29f08ae50795afd8421.pdf
    [11] Zhang D W, Liu B, Qin Y J. Construction of a large-section long pedestrian underpass using pipe jacking in muddy silty clay: A case study[J]. Tunnelling and Underground Space Technology Incorporating Trenchless Technology Research, 2016, 60: 151-164. http://www.onacademic.com/detail/journal_1000039535991010_ef0c.html
    [12] Ren D J, Xu Y S, Shen J S, et al. Prediction of ground deformation during pipe-jacking considering multiple factors[J]. Applied Sciences, 2018, 8(7): 1051. http://www.researchgate.net/publication/326021197_Prediction_of_Ground_Deformation_during_Pipe-Jacking_Considering_Multiple_Factors/fulltext/5b344cbca6fdcc8506d6f978/326021197_Prediction_of_Ground_Deformation_during_Pipe-Jacking_Considering_Multiple_Factors.pdf?origin=publication_detail
    [13] 银英姿, 赵强, 崔芳静, 等. 土压平衡矩形顶管施工引起的地表沉降探究[J]. 长江科学院院报, 2019, 36(1): 95-101. https://www.cnki.com.cn/Article/CJFDTOTAL-CJKB201901023.htm

    Yin Y Z, Zhao Q, Cui F J, et al. Ground subsidence caused by earth pressure balanced rectangular pipe jacking construction[J]. Journal of Yangtze River Scientific Research Institute, 2019, 36(1): 95-101(in Chinese with English abstract). https://www.cnki.com.cn/Article/CJFDTOTAL-CJKB201901023.htm
    [14] 郝小红, 郭佳. 考虑超大断面顶管施工过程的地层变形数值分析[J]. 华北水利水电大学学报: 自然科学版, 2017, 38(6): 66-71, 81. https://www.cnki.com.cn/Article/CJFDTOTAL-HBSL201706010.htm

    Hao X H, Guo J. Numerical analysis of stratum deformation considering large section pipe jacking construction process[J]. Journal of North China University of Water Resources and Electric Power: Natural Science Edition, 2017, 38(6): 66-71, 81(in Chinese with English abstract). https://www.cnki.com.cn/Article/CJFDTOTAL-HBSL201706010.htm
    [15] Shen S L, Cui Q L, Ho C E, et al. Ground response to multiple parallel micro tunneling operations in cemented silty clay and sand[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2016, 142(5): 04016001. http://smartsearch.nstl.gov.cn/paper_detail.html?id=55d1c0be99b59a019e33019706eb5ab5
    [16] Bao X K, Liang L J. Numerical modeling research of rectangle pipe-jacking construction[J]. Applied Mechanic and Materials, 2014, 3306: 921-924. http://www.onacademic.com/detail/journal_1000038089908010_3229.html
    [17] He C, Feng Y, Fang Y, et al. Surface settlement caused by twin-parallel shield tunnelling in sandy cobble strata[J]. Journal of Zhejiang University-Science A: Applied Physics and Engineering, 2012, 13(11): 62-73. http://d.wanfangdata.com.cn/Periodical_zjdxxb-e201211007.aspx
    [18] Yen J, Shou K. Numerical simulation for the estimation the jacking force of pipe jacking[J]. Tunnelling and Underground Space Technology, 2015, 49(6): 218-229. http://www.onacademic.com/detail/journal_1000037790009010_2cef.html
    [19] 齐培林. 并行矩形顶管施工力学与相互影响研究[D]. 武汉: 武汉科技大学, 2018.

    Qi P L. Research of construction mechanics and interaction of parallel rectangular pipe-jacking[D]. Wuhan: Wuhan University of Science and Technology, 2018(in Chinese with English abstract).
    [20] 陈月香. 超大矩形断面顶管减摩注浆作用机理及优化设计研究[D]. 福州: 福建工程学院, 2019.

    Chen Y X. Study on antifriction grouting mechanism and optimum design of super-large rectangular section pipe jacking[D]. Fuzhou: Fujian University of Technology, 2019(in Chinese with English abstract).
    [21] 葛春辉. 顶管工程设计与施工[M]. 北京: 中国建筑工业出版社, 2011.

    Ge C H. Pipe jacking engineering design and construction[M]. Beijing: China Architecture & Building Press, 2011(in Chinese).
    [22] 张凯, 武永新, 田润泽. 并行顶管不同纵向间距下施工数值模拟分析[J]. 地下空间与工程学报, 2020, 16(增刊2): 835-840. https://www.cnki.com.cn/Article/CJFDTOTAL-BASE2020S2044.htm

    Zhang K, Wu Y X, Tian R Z. Numerical simulation analysis on parallel pipe jacking under different longitudinal spacing[J]. Chinese Journal of Underground Space and Engineering, 2020, 16(S2): 835-840(in Chinese with English abstract). https://www.cnki.com.cn/Article/CJFDTOTAL-BASE2020S2044.htm
    [23] 张振. 超大矩形断面顶管隧洞开挖引起的地表沉降研究[D]. 郑州: 华北水利水电大学, 2016.

    Zhang Z. Research of surface subsidence caused by the large rectangular pipe jacking tunnel excavation[D]. Zhengzhou: North China University of Water Resources and Electric Power, 2016(in Chinese with English abstract).
  • 加载中
图(12) / 表(3)
计量
  • 文章访问数:  495
  • PDF下载量:  191
  • 被引次数: 0
出版历程
  • 收稿日期:  2020-12-02

目录

    /

    返回文章
    返回