| Citation: | Tang Zhaohui, . Optimization Design of Anchor Engineering for Dangerous Rock Mass with Uncertain Separation Surface[J]. Bulletin of Geological Science and Technology, 2019, 38(6): 176.
|
| [1] | XI Wang，CHEN Yiwei，ZHANG Wenguang，et al. Recognition of structural plane and stability analysis of high steep rocky slope based on 3D point clouds[J]. Bulletin of Geological Science and Technology，2025，${article_volume}（0）：1-10. doi: 10.19509/j.cnki.dzkq.tb20230667. |
| [3] | CHANG Zhilu，YU Qi，ZHONG Min，et al. Probabilistic stability analysis of rock slopes with coupled determining and random discontinuities[J]. Bulletin of Geological Science and Technology，2025，44（2）：1-12. doi: 10.19509/j.cnki.dzkq.tb20240388. |
| [4] | ZHANG Hang，HU Hairui，ZHU Jieqing，et al. Rapid analysis of the stability of a wedge-shaped unstable rock mass on the basis of non-contact measurements[J]. Bulletin of Geological Science and Technology，2025，44（2）：1-11. doi: 10.19509/j.cnki.dzkq.tb20240496. |
| [5] | WEI Juanhua，FU Hao，TANG Zhaohui，et al. Method study of calculating the permeability coefficient of fractured rock mass with dense sections[J]. Bulletin of Geological Science and Technology，2025，${article_volume}（0）：1-11. doi: 10.19509/j.cnki.dzkq.tb20230680. |
| [6] | Optimization of 4D Hydrogeological Processes Monitoring Through Cross-hole Electrical Resistivity Tomography (CHERT) using Bayesian experimental design[J]. Bulletin of Geological Science and Technology. doi: 10.19509/j.cnki.dzkq.tb20230600 |
| [7] | ZHOU Linggang, HU Yiting, CHEN Xinwei, TU Feng, WU Zhaofeng, YU Yang, WANG Yanbing, MAN Yin, LI Weichao. Calculation of capacity and optimization design-composite slab wall soil solidification foundation based on neural network[J]. Bulletin of Geological Science and Technology, 2024, 43(6): 102-113. doi: 10.19509/j.cnki.dzkq.tb20230720 |
| [8] | TU Meiyi, YUAN Shiyu, CHEN Jiangjun, GE Yunfeng. Slope stability evaluation of mine rehabilitation project under different rainfall conditions[J]. Bulletin of Geological Science and Technology, 2024, 43(6): 63-77. doi: 10.19509/j.cnki.dzkq.tb20230527 |
| [9] | REN Jiawei, BAI Xiaohu, TANG Sirui, CHEN Junbin, DONG Qi, YU Jinzhu. Interwell interference analysis and well spacing optimization of tight oil wells based on geological engineering integration[J]. Bulletin of Geological Science and Technology, 2024, 43(6): 271-280. doi: 10.19509/j.cnki.dzkq.tb20230631 |
| [10] | Wang Shangshang, Chen Fu, Li Dongxian, Lin Houlai, Liu Zhiliang, Li Liang. Influence of anchor uncertainty on the failure probability of reinforced slope[J]. Bulletin of Geological Science and Technology, 2022, 41(2): 282-289. doi: 10.19509/j.cnki.dzkq.2022.0055 |
| [11] | Feng Xiao, Wang Yu, Liu Yang, Liu Qingli, Du Juan, Chai Bo. Susceptibility assessment of a translational rockslide considering the control mechanism and spatial uncertainty of a weak interlayer: Application study in Tiefeng Township, Wanzhou District[J]. Bulletin of Geological Science and Technology, 2022, 41(2): 254-266. doi: 10.19509/j.cnki.dzkq.2022.0049 |
| [12] | Zheng Yingkai, Chen Jianguo, Wang Chengbin, Chen Tanwu. Application of certainty factor and random forests model in landslide susceptibility evaluation in Mangshi City, Yunnan Province[J]. Bulletin of Geological Science and Technology, 2020, 39(6): 131-144. doi: 10.19509/j.cnki.dzkq.2020.0616 |
| [13] | Zhao Quan, Wen Guojun, Liu Haojie, Wang Yudan, Liu Qingtao. Design of virtual training platform for construction machinery based on Stewart[J]. Bulletin of Geological Science and Technology, 2020, 39(3): 216-221. doi: 10.19509/j.cnki.dzkq.2020.0324 |
| [14] | Chen Guoxu, Tian Yiping, Zhang Xialin, . Rapid Construction and Uncertainty Analysis of 3D Geological Models Based on Exploration Sections[J]. Bulletin of Geological Science and Technology, 2019, 38(2): 275-280. |
| [15] | Wang Pengfei, Gao Zhennan, Li Junfei, Yang Jianmin, Song Jianfang. Uncertainty Evaluation of Geology Model Based on Mathematics Statistics[J]. Bulletin of Geological Science and Technology, 2019, 38(2): 291-269. |
| [16] | Chen Longfei, Liu Gao, Tian Hua, Lin Lei. Reliability Analysis on Loess-Red Mudstone Interface Landslide Stability[J]. Bulletin of Geological Science and Technology, 2017, 36(2): 244-248. |
| [17] | An Guanfeng, Liu Tianjun, Liang Hao, Li Zhanwei. Optimal Design of the Cured-In-Place Pipe Lining for Trenchless Rehabilitation of Drainage Pipelines[J]. Bulletin of Geological Science and Technology, 2016, 35(2): 1. |
| [18] | Wang Wenmei, Sun Ronglin. Optimal Design of Sampling Time Using Hydraulic Tomography to Characterize the Heterogeneous Aquifer Hydraulic Conductivity and Storage Coefficient[J]. Bulletin of Geological Science and Technology, 2015, 34(3): 165. |
| [19] | State-of-art of Geotechnical Engineering Limit State Design Methods in Japan[J]. Bulletin of Geological Science and Technology, 2014, 33(2): 165. |
| [20] | WANG Jian-hua, LI Xu-xuan, GU Han-ming. The Optimal Design of 3D Air-Gun Arrays Combination in Marine Seismic Exploration[J]. Bulletin of Geological Science and Technology, 2012, 31(2): 133. |
Copyright © 2010Editorial Department of Bulletin of Geological Science and Technology
Supported by:
Beijing Renhe Information Technology Co., Ltd.
Tang Zhaohui, . Optimization Design of Anchor Engineering for Dangerous Rock Mass with Uncertain Separation Surface[J]. Bulletin of Geological Science and Technology, 2019, 38(6): 176.
DownLoad: